Small Bedroom Fitted Wardrobe: Depth, Clearance and Bed Surround Details
A small bedroom fitted wardrobe works when depth is 60 cm and the door swing or slide clearance is planned first — hinged doors need 55–60 cm in front, sliding doors need the track width. Production runs 25–35 days after drawing approval, with MOQ from 1 set for sampling.
A small bedroom fitted wardrobe is governed by clearance, not floor area. The carcass is 60 cm deep because a hanger is 45 cm wide; the remaining 15 cm holds the door. A hinged door needs 55–60 cm of swing in front, a sliding door needs its track width. Plan that first, then the bed surround.
How deep does a small bedroom fitted wardrobe need to be?
Sixty centimetres is the working depth. A standard hanger is about 45 cm wide, so a 60 cm carcass leaves roughly 15 cm for the door, its mechanism and the small gap that stops the door fouling the rail. Going shallower than 60 cm forces hangers to sit at an angle, which costs usable hanging length and creases shoulders.
In a genuinely small room, the honest options are:
- Keep 60 cm and shorten the run. A 1.2 m wide, 60 cm deep wardrobe stores more than a 2.4 m wide, 45 cm deep one, because every hanger works properly.
- Split the depth. A 60 cm hanging bay beside a 35–40 cm shelf bay for folded goods and shoes. The shelf bay can sit against the door wall where swing is tight.
- Go end-of-bed or alcove. Recessed alcoves and the wall behind the bed head are often the only full-depth locations in a small room.
Depth is a decision you make on the drawing, not in the catalogue. Ask the factory to show the section drawing with the hanger, the rail and the door in place, at full scale, before you approve anything.
What clearance does a small bedroom fitted wardrobe need in front?
This is the number that ruins small bedrooms. A hinged door needs 55–60 cm of clear floor in front of the carcass to open and let a person stand at the opening. A sliding door needs no swing, but it needs the full track width clear along the face, and you can only access half the wardrobe at a time.
| Door type | Clear floor needed in front | Best used when | Trade-off |
|---|---|---|---|
| Hinged, 2–3 doors | 55–60 cm swing | Room is at least 2.6 m wide across the wardrobe wall | Blocks the bed or door path in narrow rooms |
| Sliding, 2 panels | Track width only, no swing | Bed sits 70–90 cm from the wardrobe | Half the opening accessible at once; track collects dust |
| Bi-fold | 30–40 cm | Short run, tight corner | More panels, more hardware to align |
| Open niche / no door | 0 cm | Bed surround shelving, bedside niches | Everything visible; needs disciplined storage |
Measure from the carcass face, not the wall. A 60 cm deep wardrobe in a 2.4 m wide room leaves 1.8 m of floor; subtract 60 cm of swing and you have 1.2 m for the bed and the walking path. That arithmetic decides whether the room works.
How do you fit a wardrobe and bed surround into a small room?
Treat the wardrobe and the bed surround as one joinery package drawn on one plan. The bed surround — headboard panel, bedside niches, over-bed shelving, the return panel that closes the gap to the wardrobe — is where small rooms gain storage without gaining floor area.
Details that work:
- Continuous headboard panel. A full-width panel behind the bed, 90–120 cm high, gives a fixed line for bedside niches and hides the wall junction.
- Niches instead of bedside tables. Recessed niches at 55–65 cm above the mattress free the floor beside the bed entirely.
- Over-bed shelving at 1.8 m and above. Above head height when standing, so it never intrudes, but reachable from the mattress edge.
- Return panel to the wardrobe. Closing the gap between the bed surround and the wardrobe carcass removes a dust trap and a visual break.
- Same finish across both. One lacquer or melamine specification across wardrobe, headboard and niches makes a small room read as one wall rather than three objects.
Because these parts are cut and edged on the same panel line as the wardrobe, ordering them as one scope is what keeps the joints and shadow gaps consistent.
What drives the cost of a small bedroom fitted wardrobe?
Four things move the price: carcass board, door finish, hardware brand and the number of non-standard parts. The carcass is a smaller share of a whole-room order than of a kitchen alone, because doors and fronts carry more of the value.
| Cost driver | What changes | How to control it |
|---|---|---|
| Carcass board | E1 melamine-faced particleboard vs E0 plywood | Ask for two complete quotes on identical drawings, door finish and hardware held constant |
| Door finish | Melamine, PVC membrane, PET, lacquer, veneer, acrylic | Keep one finish family across wardrobe and bed surround |
| Hardware | Blum / Hettich / DTC, or client-specified | Specify brand and model in writing on the drawing |
| Non-standard parts | Curves, angled returns, niches, integrated lighting | Square off what you can; every curve is a new jig |
The only reliable way to price the board question is two quotes on the same drawings. The difference between those two documents is your real number.
What are the MOQ, lead time and shipping numbers?
MOQ starts at 1 set for sampling and moves to project pricing from 20 sets upward. Production runs 25–35 days after drawing approval and deposit — the clock starts at approved drawings, not at enquiry, and lead time is set after drawing approval.
| Stage | Typical figure |
|---|---|
| Sampling MOQ | 1 set |
| Project pricing MOQ | 20+ sets |
| Production after drawing approval and deposit | 25–35 days |
| Ocean freight, 20ft container of cabinets | USD 1,200–3,500 |
| Destination charges, customs and haulage | USD 800–2,500 |
| Total logistics band, 20ft trial order | USD 2,500–6,000 |
| Door-to-door, South China to Southeast Asia | 5–8 weeks |
| Door-to-door, South China to Saudi Arabia | 9–14 weeks |
On a single-set trial order, the logistics bill is usually the largest line. Shipping is offered flat-pack or assembled, on FOB, CIF or DDP terms, and on-site installation supervision is available for large projects.
What should a buyer demand in writing before approving drawings?
Ask for the section drawing, the clearance plan and the finish schedule, all on one document set. Specifically:
- The carcass depth and the internal clear depth behind the door.
- The door type and its stated clearance in front of the carcass.
- The board type named by grade and the door finish named by product family.
- The hardware brand and model, per item.
- The bed surround dimensions: headboard height, niche height above mattress, over-bed shelf height.
- The production start date, expressed as days after drawing approval.
If a supplier will not put the clearance figure on the drawing, the room will be built around a guess. That is the single most expensive mistake in a small bedroom.
Frequently asked questions
How deep should a small bedroom fitted wardrobe be?
Sixty centimetres is the working depth, because a hanger is about 45 cm wide and the remaining 15 cm holds the door and its mechanism. Going shallower forces hangers to sit at an angle and wastes hanging length. If the room is tight, shorten the wardrobe run rather than the depth.
How much space do I need in front of a fitted wardrobe?
A hinged door needs 55–60 cm of clear floor in front of the carcass to open and let someone stand at the opening. A sliding door needs no swing but requires the full track width clear along the face. Measure from the carcass face, not the wall.
Are sliding doors better than hinged doors in a small bedroom?
Sliding doors suit rooms where the bed sits 70–90 cm from the wardrobe, because they need no swing. The trade-off is that only half the opening is accessible at once and the track collects dust. Hinged doors give full access but need 55–60 cm of clear floor.
What is the minimum order quantity for a fitted wardrobe?
MOQ starts at 1 set for sampling, which is how most first-time buyers test the factory. Project pricing applies from 20 sets upward. On a single-set order the logistics bill is usually the largest line, so budget for that separately from the cabinetry.
How long does production and shipping take?
Production runs 25–35 days after drawing approval and deposit — the clock starts at approved drawings, not at enquiry. Door to door, plan 5–8 weeks from South China to Southeast Asia and 9–14 weeks to Saudi Arabia, including booking, sailing, clearance and haulage.
What does shipping a wardrobe order cost?
For a 20ft container of cabinets, ocean freight typically runs USD 1,200–3,500 and destination charges, customs and haulage USD 800–2,500, giving a total logistics band of roughly USD 2,500–6,000 depending on port, terms and whether you ship flat-pack. These figures exclude the cabinetry itself.
Can the bed surround be made in the same finish as the wardrobe?
Yes, and it should be. Headboard panel, bedside niches, over-bed shelving and the wardrobe carcass are cut and edged on the same panel line, so one finish specification across both makes a small room read as a single wall rather than three separate objects.
What should be on the drawing before I approve it?
Carcass depth and internal clear depth, door type and its clearance in front, board grade, door finish family, hardware brand and model per item, bed surround heights, and the production start expressed as days after drawing approval. If the clearance figure is missing, the room is being built around a guess.