Custom Kitchen Cost in the Philippines: What Moves the Number
There is no single per-square-metre price for a custom kitchen in the Philippines — quotes are built from drawings across five cost blocks. Carcass grade, door finish, countertop, hardware and freight/duty move the number more than floor area does.
Short answer: there is no single per-square-metre price for a custom kitchen in the Philippines. ONE HOME BUILD quotes from drawings, and the number is built bottom-up from five cost blocks — carcass material, door finish, countertop, hardware, and freight/duty/installation. Two kitchens of identical floor area can land far apart on those five blocks alone.
How much does a custom kitchen cost in the Philippines?
A Philippine custom kitchen is priced per project, from a drawing set, not from a rate card. The reason is that a kitchen is not sold by area — it is sold as a combination of carcass specification, door finish, countertop material, hardware brand and delivery terms. A 6-linear-metre run in E1 melamine-faced particleboard with PVC membrane doors and DTC hinges is a different product from the same 6 metres in an E0 plywood carcass with matte lacquer doors, Blum hinges and a sintered stone top.
So the useful question is not "what is the price per square metre" but "which of the three tiers below am I buying, and what is in my quote that is not in the other guy's?" We do not publish a headline rate, because any number published without a specification is a number a buyer will later argue with.
Why can't you publish a price per square metre?
Because the same footprint can be specified three ways, and each way is a legitimate product.
| Tier | Carcass | Door finish | Hardware | Countertop |
|---|---|---|---|---|
| Entry | E1 particleboard, melamine-faced | PVC membrane | DTC | Granite or solid surface |
| Mid | E0 plywood | PET or matte lacquer | Hettich | Quartz |
| High | E0/E1 plywood or solid wood | Veneer, gloss acrylic or high-gloss lacquer | Blum | Sintered stone or quartz |
All three are made in the same plant. The gap between the top and bottom row is not a margin decision — it is what the materials and processes cost. That is why we ask for drawings before we say a number, and why the shop drawings come back to you before production: the drawing is the price.
What are the five cost blocks in a kitchen quote?
Every kitchen quote we issue breaks into the same structure. Ask any supplier in the Philippines to break theirs down the same way and the comparison becomes possible.
- Carcass. Board type and thickness, shelf count, drawer boxes, back panel, edge banding.
- Doors and drawer fronts. Finish type, profile (shaker, flat slab, handleless), quantity of door panels versus drawer fronts, and whether the design uses handleless J-profiles or gapped finger pulls.
- Countertop. Material, thickness, edge profile, cut-outs for sink and hob, upstand or splashback, number of joints.
- Hardware. Hinge and runner brand, soft-close or not, lift-up systems, pull-out baskets, corner carousels.
- Freight, duty and installation. FOB, CIF or DDP terms, flat-pack versus assembled shipping, port and customs charges, and site installation or supervision.
Which material choices move the price the most?
In our experience of quoting, the three biggest swings are the door finish, the countertop and the hardware brand — in that order. Carcass board matters, but the carcass is largely hidden; the door is the thing you touch every day and the finish process is where labour sits.
A PVC membrane door and a high-gloss lacquer door can be the same panel underneath. A granite top and a sintered stone top can be the same thickness. Blum and DTC hinges can look identical on a spec sheet. This is exactly why a quote that says "kitchen cabinets" with no material line is not comparable to one that names the board, the finish, the hinge brand and the top.
Does plywood versus particleboard matter in Philippine humidity?
Yes, and it is the first question to settle, because it is a carcass-level decision you cannot change later.
We offer E0/E1 plywood, particleboard with melamine facing, and solid wood. Plywood is the specification to discuss for humid sites, coastal locations and ground-floor kitchens where moisture is a real condition rather than a theoretical one. Melamine-faced particleboard is the lower-cost option and performs within its specification — but it is a different specification.
Do not accept "moisture-proof board" as an answer on a quote. Ask for E0 or E1 and ask which one. Those are formaldehyde emission grades and they are stated on the material, not invented by the salesperson.
How much does the countertop add?
The top is a separate line and should stay a separate line on your quote. We supply quartz, sintered stone, solid surface and granite. The cost variables inside that line are not only the material: thickness, edge profile, number of joints, and the cut-outs for sink and hob all sit in the same number.
A long run with two joints costs more to fabricate and more to install than a short run with one. A waterfall edge or a thick mitred edge is a different fabrication process from a 20 mm square edge. If your quote lists "countertop — inclusive", ask what material and what thickness, or the line cannot be checked.
Does hardware brand really change the number?
Yes, and it is the easiest line to audit. We fit Blum, Hettich or DTC, and the client specifies which. The brand affects both the unit price and the failure rate over the life of the kitchen.
Specify the hardware before the quote, not after. A quote built on DTC and then upgraded to Blum after signing is a variation, and variations are where budgets break. The same applies to internal accessories — pull-out baskets, corner carousels and lift-up systems are line items, not free extras.
How does shipping from China to the Philippines affect the price?
Freight is a real cost block, and how you ship changes it. We ship flat-pack or assembled, and we quote FOB, CIF or DDP.
- Flat-pack uses less container volume, so more kitchens fit per container and the freight per kitchen drops. It requires competent local assembly.
- Assembled arrives ready to set, which moves cost from site labour into freight volume.
- DDP puts duty and destination charges into our number, so your landed cost is one figure instead of three suppliers.
The decision is not automatically flat-pack. It depends on your installation crew in the Philippines. If assembly quality on site is uncertain, the freight saving can be spent twice fixing joints.
What is the minimum order?
MOQ starts at 1 set for sampling, and project pricing applies from 20 sets upward. That matters for Philippine developers and contractors running multi-unit work: a single showroom unit can be produced at sample MOQ to approve the finish, then the tower or the subdivision is priced at project level.
What do I need to send to get a real number?
Send these and the quote is a quote, not an estimate:
- Floor plan with dimensions, and ceiling height at the kitchen.
- Elevations of each cabinet run, or a sketch with run lengths and heights.
- Appliance schedule — hob, oven, sink, fridge, range hood, with models.
- Tier choice: carcass board, door finish, countertop material, hardware brand.
- Shipping preference: flat-pack or assembled, and FOB, CIF or DDP.
- Installation scope: supply-only, or supply with on-site supervision.
Shop drawings follow the deposit, and production starts after you approve them. We offer on-site installation supervision for large projects.
What pushes a Philippine kitchen over budget?
Three things, repeatedly.
Changes after deposit. Any change after drawing approval re-opens the drawing, the cutting list and sometimes the material order. Settle the finish, the hardware and the appliance models before the deposit, not after.
Appliance models chosen late. A fridge that arrives after the tall unit is drawn costs a rebuilt unit. Fix the appliance schedule first.
Comparing quotes with different scopes. A quote without a countertop, or without duty, or without installation, will always look cheaper. Put both quotes into the five cost blocks above and compare block by block.
What should I compare between suppliers?
Compare the specification, not the headline. Same drawing, same board grade, same finish, same hardware brand, same countertop material, same delivery term. Then compare. A per-square-metre number with no specification behind it tells you nothing about what will be installed in your building.
Frequently asked questions
How much does a custom kitchen cost in the Philippines?
There is no single per-square-metre rate. A custom kitchen is quoted from drawings as five cost blocks: carcass board, door finish, countertop, hardware, and freight/duty/installation. Two kitchens with identical floor area can differ substantially because an E1 particleboard carcass with PVC membrane doors and DTC hardware is a different product from an E0 plywood carcass with lacquer doors, Blum hardware and a sintered stone top.
Is a custom kitchen from China cheaper than a local Philippine fabricator?
Do not compare headline numbers. Ask both suppliers to price the same drawing and to break the quote into carcass, doors, countertop, hardware, and freight/duty/installation. Whichever quote names the board grade (E0 or E1), the finish, the hinge brand (Blum, Hettich or DTC) and the countertop material is the one you can actually compare. A quote missing those lines cannot be checked.
What is the minimum order for a custom kitchen from ONE HOME BUILD?
MOQ is 1 set for sampling, and project pricing applies from 20 sets upward. That structure suits Philippine developers and contractors who want to approve a finish on a single showroom or mock-up unit before committing a tower or subdivision phase to the same specification.
Should I specify plywood or particleboard for a kitchen in the Philippines?
Plywood is the specification to discuss for humid sites, coastal locations and ground-floor kitchens. ONE HOME BUILD offers E0/E1 plywood, particleboard with melamine facing, and solid wood. Ask which formaldehyde emission grade is quoted — E0 or E1 — and never accept the vague term "moisture-proof board" in place of a stated grade.
What do I need to send to get an accurate kitchen quote?
A floor plan with dimensions and ceiling height, elevations or sketches with run lengths, and the appliance schedule including hob, oven, sink, fridge and hood models with model numbers. Add your tier choice for carcass, door finish, countertop and hardware brand, plus whether you want flat-pack or assembled shipping and FOB, CIF or DDP terms.