Flat-pack or assembled: the part nobody prices
Flat-pack cuts shipping volume sharply. What it does not cut is site labour and rework, and that is the number that decides whether it was worth it.

Flat-pack or assembled: the part nobody prices
Flat-pack cuts shipping volume sharply. What it does not cut is site labour and rework, and that is the number that decides whether it was worth it.
Flat-pack reduces shipping volume by roughly 60 to 70 percent on carcass-heavy orders. That is the part everyone prices. The part nobody prices is the labour on site and the rework after a badly packed panel arrives bowed.
Both methods need the same thing: a numbered packing list that matches the drawing. Without it, a flat-pack delivery becomes a site-wide search for parts, and an assembled delivery becomes a container that cannot be unloaded in sequence.
Our default on distant markets is flat-pack, panels stacked by room and labelled to the drawing, with hardware in a sealed box per unit. Assembled is for projects where the installation team is ours or where the unit cannot be assembled on site.
What actually happens to a flat-pack order from factory to installed unit?
The process starts with the drawing set, not the saw. Each unit is broken down into panels, and every panel is assigned a number that appears on the drawing, the packing list and the panel itself. Panels are then stacked by room rather than by size, so a delivery can be opened in the order the installation team works. Hardware for each unit goes into a sealed box, labelled to match the unit it belongs to.
On site, the sequence reverses. The team opens the stack for the room they are installing, checks the panels against the numbered list, and assembles. Anything missing or damaged is identified at that point, while the stack is still organised, rather than halfway through a run of units. The labour on site is assembly labour, and it is real: flat-pack moves work from the factory floor to the buyer's floor. The saving is in shipping volume, and the cost is in the hours your installers spend joining panels that would otherwise arrive joined.
How should a buyer compare flat-pack and assembled beyond shipping cost?
Shipping volume is the visible number. The comparison that matters is total cost to a finished, accepted installation. On the flat-pack side, count assembly hours per unit, the site space needed to stage stacked panels, and the handling equipment required to move them. On the assembled side, count the cost of moving a bulky unit through corridors, lifts and doorways, and the risk of damage during that move.
Then compare the two against the same packing discipline. Ask whether both options come with a numbered packing list matched to the drawing, and whether hardware is boxed per unit in both cases. A cheap shipping quote on an order with no packing discipline is not a cheaper option; it is the same option with the rework moved to your site and your schedule. The decision should also account for who is installing. If the installation team is yours, flat-pack puts assembly labour on your side of the ledger. If the team is the manufacturer's, that labour sits with them and the comparison changes.
What should a buyer check before confirming either method?
Check the packing list first. It should be numbered and match the drawing line for line, so a panel can be found without searching the whole delivery. Check that panels are stacked by room, not by size, because a size-sorted stack forces the installers to unpack everything to find one piece. Check that hardware is sealed in a box per unit and labelled to that unit.
Check the condition the panels will arrive in. A panel that arrives bowed is rework, and rework is the cost the shipping quote never shows. Ask how panels are protected in the stack and how the stack is secured for the journey. Confirm who is responsible for assembly labour and who absorbs the cost of a missing or damaged part found on site. Finally, confirm the unloading sequence: an assembled delivery that cannot be unloaded in the order the site needs it becomes a container sitting on the ground. These checks apply equally to both methods, and they are the difference between a priced shipment and a priced installation.
Start with
a brief.
Send the drawings and the room list. We will come back with a scope, a finish schedule and a price range.
Buyer questions
How much does flat-pack reduce shipping volume compared to assembled cabinetry?
Flat-pack reduces shipping volume by roughly 60 to 70 percent on carcass-heavy orders. That saving covers shipping only. It does not cover site labour or rework, such as a bowed panel arriving from bad packing. Whether the reduction was worth it depends on those site costs, not on the shipping figure alone.
When do you recommend flat-pack versus assembled cabinetry?
Flat-pack is the default for distant markets, with panels stacked by room and labelled to the drawing, and hardware in a sealed box per unit. Assembled is used for projects where the installation team is ours, or where the unit cannot be assembled on site.
What packing documentation is needed for flat-pack or assembled orders?
Both methods need a numbered packing list that matches the drawing. Without it, a flat-pack delivery turns into a site-wide search for parts, and an assembled delivery becomes a container that cannot be unloaded in sequence. The packing list is what keeps either method workable on site.