Import Cabinets from China vs Buy Local in the Philippines: Landed Cost

ONE HOME BUILD

Importing cabinets from China is usually cheaper than local custom fabrication in the Philippines only when you compare landed cost, not FOB price. Add freight, duty, port charges, delivery and installation before you decide.

Short answer: importing cabinets from China is usually cheaper than local custom fabrication in the Philippines — but only when you compare landed cost, not the factory price. Landed cost means FOB price plus freight, duty, port and customs charges, inland delivery and installation. On a single kitchen the gap can disappear; from 20 sets upward it usually holds.

Why is comparing FOB price to a local quote misleading?

Because the two numbers describe different things. A Chinese factory FOB price covers materials and production only. A Philippine fabricator's quote usually already includes delivery to site and installation labour. Comparing them directly flatters the import number by 15–30% before you have paid a single port charge.

Build both sides into the same five blocks before you decide:

  • Carcass material — E0 or E1 plywood, particleboard with melamine, or solid wood.
  • Door finish — lacquer (matte or gloss), PET, acrylic, veneer or PVC membrane.
  • Countertop — quartz, sintered stone, solid surface or granite.
  • Hardware — Blum, Hettich or DTC, soft-close or not, lift-up systems, pull-out baskets, corner carousels.
  • Freight, duty and installation — FOB, CIF or DDP terms, flat-pack versus assembled shipping, port and customs charges, site installation or supervision.

In our quoting experience the three biggest price swings are the door finish, the countertop and the hardware brand — in that order. Carcass board matters, but the carcass is largely hidden. The door is what the buyer touches every day, and the finish process is where labour sits. A PVC membrane door and a high-gloss lacquer door can be the same panel underneath and differ heavily in price.

What actually lands on top of the factory price?

Five cost layers sit between a Chinese FOB quote and a cabinet standing in a Philippine unit. Each one is real money and each one is negotiable in a different way.

1. Freight

Sea freight from South China to Manila is the largest single add-on for most buyers. It is quoted per container, so the cost per cabinet falls as the container fills. This is the structural reason small orders lose the import advantage and large orders keep it.

2. Duty and taxes

Import duty and VAT are assessed on the declared value plus freight and insurance, not on the FOB number alone. Ask your broker for the rate that applies to your specific product classification before you sign anything. Do not accept a supplier's estimate of duty as final — it is your broker's number that gets paid.

3. Port, customs and clearance charges

Terminal handling, documentation, brokerage and haulage from port to your site. These are largely fixed per shipment, which again penalises small orders and rewards full containers.

4. Inland delivery and handling

Manila to a provincial site is a different number from Manila to a Metro Manila condo tower. Flat-pack cartons are cheaper to move and store than assembled boxes; assembled units take more volume and are more exposed to damage in transit.

5. Installation

Local fabrication usually bundles installation. Import does not, unless you buy on DDP terms with installation supervision. Budget for a Philippine crew either way — and read the flat-pack decision carefully, because it is not automatically cheaper.

Flat-pack or assembled: which is cheaper landed?

Flat-pack ships more cabinets per container and costs less in freight. That saving is real. But it moves assembly labour to your site in the Philippines, and if assembly quality on site is uncertain, the freight saving can be spent twice fixing joints.

The decision depends on your installation crew, not on the freight rate. If you have a crew that has assembled exported flat-pack before, ship flat-pack. If your crew is general contractors who have only installed finished boxes, price assembled units and compare the two landed totals honestly.

At what order size does importing win?

MOQ starts at 1 set for sampling, and project pricing applies from 20 sets upward. That structure maps directly onto the landed-cost maths.

  • 1 set (sample or showroom unit): produced at sample MOQ to approve the finish. Freight and port charges are spread over one kitchen, so the landed cost per set is at its highest. Import rarely wins here on price — it wins on specification control.
  • 20+ sets: project pricing applies, and the fixed freight, duty and clearance layers spread across many units. This is where the import route normally beats local fabrication on landed cost.

For Philippine developers and contractors running multi-unit work, the practical sequence is: produce one showroom unit at sample MOQ to approve the finish, then price the tower or the subdivision at project level.

What does local fabrication in the Philippines do better?

Three things, and they are worth money even if they are not on the invoice.

  • Site measurement and rework. A local shop can re-measure a unit that is out of square and rebuild a panel in days. An import panel that is wrong is a shipment, not a phone call.
  • Small and irregular scopes. One vanity, one TV wall, one odd corner — the fixed import layers cannot be spread thin enough to compete.
  • Cash flow and warranty. Local terms are usually shorter and the warranty holder is in the same country as the defect.

None of this makes local cheaper on a 40-unit tower. It makes local the right answer on a single irregular kitchen.

What should you put in the comparison sheet?

Build one table with two columns — import and local — and the same rows on both sides. If a row is blank on one side, the comparison is not finished.

RowWhat to record
CarcassBoard type and grade (E0/E1 plywood, melamine particleboard, solid wood), thickness
DoorFinish type, edge treatment, whether the finish is the same on both faces
CountertopMaterial, thickness, edge profile, cut-outs included or not
HardwareBrand and model, soft-close yes/no, lift-up and pull-out items listed
Trade termsFOB, CIF or DDP — and what each term excludes
FreightContainer size, flat-pack or assembled, cost per container
Duty and VATRate from your broker, applied to the correct assessable value
Port and clearanceTerminal handling, documentation, brokerage, port-to-site haulage
InstallationWho installs, at what rate, and who pays for rework
Lead timeProduction days plus transit plus clearance plus installation
WarrantyWho holds it, in which country, and how a claim is handled

What do you need to send to get a real landed number?

Send these and the quote is a quote, not an estimate:

  • Floor plan with dimensions, and ceiling height at the kitchen.
  • Elevations of each cabinet run.
  • Door finish and colour reference.
  • Countertop material and edge detail.
  • Hardware brand and the specific items you want.
  • Destination port and site address.
  • Trade term you want quoted — FOB, CIF or DDP.
  • Flat-pack or assembled.

Free shop drawings follow the deposit. That drawing set is the document both sides price from, and it is the only way to compare a Chinese quote and a Philippine quote on the same scope.

The decision rule

If you are buying one kitchen with irregular site conditions, buy local and accept the higher unit price. If you are fitting 20 or more units to a repeatable drawing, price the import route on landed cost — including duty, port charges, delivery and installation — and compare that total against the local quote for the same specification. The factory price is the start of the calculation, not the answer.

Frequently asked questions

Is it cheaper to import kitchen cabinets from China to the Philippines?

Usually yes at volume, but not on factory price alone. Landed cost adds freight, duty, VAT, port and clearance charges, inland delivery and installation. On a single kitchen those fixed layers can erase the saving. From 20 sets upward, where project pricing applies, the import route normally wins on landed cost.

What is the minimum order for custom cabinets from China?

MOQ starts at 1 set for sampling, and project pricing applies from 20 sets upward. That lets a Philippine developer produce one showroom unit to approve the finish, then price the full tower or subdivision at project level once the specification is locked.

Should I ship flat-pack or assembled to the Philippines?

Flat-pack ships more cabinets per container and lowers freight, but it moves assembly labour to your Philippine site. If your crew has assembled exported flat-pack before, ship flat-pack. If your crew has only installed finished boxes, price assembled units — the freight saving can be spent twice fixing joints.

What costs sit on top of the FOB price?

Five layers: sea freight, import duty and VAT assessed on value plus freight and insurance, port and customs clearance charges, inland delivery from port to site, and installation labour. Ask your broker for the duty rate on your product classification rather than relying on a supplier estimate.

When is local fabrication in the Philippines the better choice?

On single kitchens, irregular or small scopes, and sites that are out of square. A local shop can re-measure and rebuild a panel in days, while an incorrect imported panel means another shipment. Local quotes also usually bundle installation and keep the warranty holder in the same country as the defect.