Door & Wall System from a China Factory: Buyer's Guide
Door and wall systems are quoted from approved shop drawings, not a catalogue. Door finish, core build-up and hardware brand move the price most; production runs 25-35 days after drawing approval and deposit, with MOQ from 1 set for sampling.
Door and wall systems from a Chinese millwork factory are quoted from approved shop drawings, not from a price list. The number is built bottom-up from five blocks: door core and carcass board, door and panel finish, hardware, wall-panel substrate and trim, and freight/duty/installation. Production runs 25-35 days after drawing approval and deposit. MOQ starts at 1 set for sampling and 20+ sets for project pricing.
What is a "door and wall system" in a millwork order?
It is the interior door leaf and frame plus the wall panelling, reveals and trim that meet it, produced on the same panel system as kitchens and wardrobes. Buying it as one package is what keeps the shadow gaps consistent.
In practice the package contains: door leaves, door frames or jamb linings, architraves or a shadow-gap reveal, wall panels (flat, slatted or grooved), skirting, and the trims that close the junctions. Because these parts are cut, edged and finished on the same line as cabinetry, the specification logic carries over directly from kitchen cabinetry — and so do the cost drivers.
If you order doors from one supplier and wall panels from another, the 8 mm shadow gap that decides the wall is decided twice, by two factories, with two tolerances. That is the single most common reason a door-and-wall package looks wrong on site.
What do I need to send to get a real number?
Send a drawing set, not a description. A quote built from a photo or a reference link is an estimate, and it will move once the factory sees dimensions.
The minimum package we can quote from:
- Floor plans with wall thicknesses and structural openings marked.
- Door schedule: opening width, height, wall thickness, swing direction, leaf count, fire or acoustic requirement if any.
- Elevations of every panelled wall, with the panel module and joint positions drawn.
- Finish callouts per surface — face, back, edges — not one callout for the whole door.
- Hardware schedule with brand and model, or an explicit "factory standard" instruction.
- Site tolerance: who measures the as-built openings, and when.
Shop drawings come back free after deposit. Approve them before production starts; the 25-35 day clock begins at drawing approval and deposit, not at enquiry.
How do I choose the door core and the panel substrate?
Choose the core by what the door has to survive — acoustic separation, fire rating, humidity, or heavy daily traffic — then choose the finish. Buyers who pick the finish first usually pay for a core upgrade later.
Core options we build to:
- Solid core / solid wood — the heaviest and most stable under impact; the right base for a lacquered or veneered door in a hotel corridor or a family home.
- Honeycomb or hollow core — lighter and cheaper, acceptable for low-traffic interior doors, not for acoustic separation.
- E0 or E1 plywood — the same board grades we use in cabinet bodies; specify E0 where indoor air quality is a tender requirement.
- Particleboard with melamine — the budget substrate for wall panels and back-of-house doors, not for a wet-area door.
For wall panels, the substrate decision is about flatness and fixing, not strength. A panel that is not flat before finishing will not be flat after finishing. State the substrate grade and the panel thickness on the drawing, and state whether the panel is fixed to battens or direct-fixed — the fixing method changes the reveal detail.
Which finish should I specify, and what does it cost me?
Door finish is one of the three biggest price swings in any millwork quote, alongside carcass board and hardware brand. The finish you name on the drawing is the finish you are entitled to inspect.
Finishes we produce:
- Lacquer, matte or gloss — the most common door finish; matte hides site marks, gloss shows every ripple in the substrate.
- Veneer — specify the species, the cut and whether grain is book-matched or running. "Book-matched" is a commitment, not a decoration; it constrains how leaves are sequenced from the flitch.
- PET — a film finish, consistent in colour, good where a project needs many identical leaves.
- Acrylic — high gloss with depth; the substrate must be flat or the reflection shows it.
- PVC membrane — the lowest-cost wrapped finish; suited to profiles and budget wall panels.
Two rules that save money: do not specify gloss over a substrate you have not specified as flat, and do not mix finish families across door and wall in the same sightline unless the sample board proves they match under site lighting.
What drives the cost of a door and wall package?
Five blocks, in the order they usually move the number:
- Door finish. Lacquer versus veneer versus PVC membrane is the widest swing on the door line.
- Core and board grade. Solid core and E0 plywood cost more than hollow core and melamine particleboard.
- Hardware brand. Blum, Hettich or DTC — you can specify any of them, and a named brand is a line you can read in a quote; an unbranded one is a line you cannot.
- Wall panel area and complexity. Slatted and grooved panels cost more per square metre than flat panels because of the machining and the joint layout.
- Freight, duty and installation. FOB, CIF or DDP terms, flat-pack versus assembled shipping, and whether you take on-site installation supervision.
Floor area is not a cost driver here. Two apartments of identical floor area can land far apart on those five blocks alone. Ask for the quote broken into these blocks so you can compare two factories on the same specification instead of on the same total.
Flat-pack or assembled — which should I order?
Flat-pack ships more volume per container and costs less in freight; assembled arrives faster on site and costs less in labour. The choice is a landed-cost decision, not a quality decision.
For door and wall packages the trade-off is sharper than for cabinets, because door leaves and long panels are the parts most likely to be damaged in transit and the parts most expensive to remake. Decide the shipping method before you finalise the panel module — a module designed for flat-pack has different joint and fixing details than one designed for assembled delivery.
What are the common defects, and how do I inspect against them?
Inspect against the approved shop drawing and the approved sample board, at the factory, before packing. Most disputes on this product line are specification disputes, not manufacturing failures.
What to check:
- Colour and sheen against the sample board, in daylight and under the site's colour temperature. Lacquer batches vary; the sample is the reference.
- Grain sequence on veneered leaves — confirm book-matched or running grain matches the approved layout, leaf by leaf.
- Edge banding and edge finish — no lifting, no visible glue line, consistent radius.
- Flatness of wall panels — check with a straight edge across the panel and across a joint between two panels.
- Shadow gap consistency — measure the gap at several heights on each opening, not once.
- Door swing and clearance — hang a sample leaf in its frame and check the swing before the batch ships.
- Hardware — brand and model on the box must match the schedule; check hinges and locks per leaf.
- Moisture and board grade — confirm the E0/E1 marking on the board actually used, not on the sample.
Agree the inspection list as part of the order, not after the first container. If you cannot attend, appoint a third-party inspector and give them the drawing set and the sample board reference.
What are the MOQ and lead times?
MOQ starts at 1 set for sampling and 20+ sets for project pricing. Production runs 25-35 days after drawing approval and deposit.
Plan backwards from the site date: drawing approval, then 25-35 days production, then freight and customs, then installation. Sampling first is the cheapest way to settle finish and shadow-gap questions before you commit a project quantity — a sample door and a sample panel joint answer more than a page of specification text.
How do I compare two factories on this package?
Send both the same drawing set and the same finish and hardware schedule, and ask for the quote split into the five cost blocks. Then compare:
- Board grade stated explicitly (E0 or E1 plywood, particleboard with melamine, solid wood).
- Door core stated explicitly, not left as "standard".
- Hardware brand and model named per item.
- Panel thickness and fixing method on the drawing.
- Lead time counted from drawing approval, not from enquiry.
- Inspection list and sample board agreed in writing.
A quote that names all six is comparable. A quote that names none of them is a number, not an offer.
Frequently asked questions
What is the minimum order for door and wall systems from a Chinese factory?
MOQ starts at 1 set for sampling and 20+ sets for project pricing. Sampling first is the cheapest way to settle finish, sheen and shadow-gap questions before committing a project quantity, because a sample door and a sample panel joint answer more than a written specification.
How long does production take?
Production runs 25-35 days after drawing approval and deposit. The clock starts at drawing approval, not at enquiry, so plan backwards from your site date: drawing approval, then 25-35 days production, then freight and customs, then installation.
Which door core should I specify?
Choose the core by what the door must survive. Solid core or solid wood suits lacquered or veneered doors in hotels and family homes; honeycomb or hollow core is acceptable for low-traffic interior doors but not for acoustic separation. E0 or E1 plywood is the board grade to name where indoor air quality is a tender requirement.
What drives the price most?
Door finish, core and board grade, hardware brand, wall panel area and complexity, and freight/duty/installation. Floor area is not a driver — two apartments of identical floor area can land far apart on those five blocks. Ask for the quote split into these blocks so two factories can be compared on the same specification.
Should I order flat-pack or assembled?
Flat-pack ships more volume per container and costs less in freight; assembled arrives faster on site and costs less in labour. It is a landed-cost decision, not a quality decision. Decide the shipping method before finalising the panel module, because flat-pack and assembled designs use different joint and fixing details.
What should I inspect before shipment?
Inspect against the approved shop drawing and sample board at the factory: colour and sheen in daylight, veneer grain sequence leaf by leaf, edge banding, panel flatness across joints, shadow-gap consistency at several heights, door swing, hardware brand per leaf, and the E0/E1 marking on the board actually used.