Home / Collection / Bathroom Vanity
浴室柜
WET AREA

Bathroom Vanity

Wet-area cabinetry and stone tops, specified with the sealing and substrate detail written down.

PANEL
Board & substrate
HARDWARE
Hinges, runners, handles
FINISH
Veneer, lacquer, laminate
LEAD TIME
Confirmed after drawing review
Request a quote for this category View gallery

This product line covers custom bathroom vanities — wall-hung, floor-standing and double-basin units — built to your shop drawings in E0 or E1 plywood with lacquer, PET, acrylic, veneer or PVC membrane doors. It suits developers, contractors and fit-out firms specifying hotel guestrooms, serviced apartments and residential bathrooms in volume, where the same unit repeats across many rooms.

Specifications

Vanities are quoted from drawings, so the table below is the baseline we build to. Any line can be changed if you specify it before the quote — the number moves with the specification, not with the room.

ItemStandard specificationOptions
Width600-1800 mm (single or double basin)Any width from drawings
Depth450-550 mmDown to 400 mm for compact rooms
Height800-850 mm floor-standing; 500-600 mm wall-hungSet by basin and mirror line
Carcass board18 mm E0 or E1 plywoodParticleboard with melamine; solid wood
Back / base panel5-9 mm moisture-resistant board—
Door finishLacquer, matte or glossPET, acrylic, veneer, PVC membrane
Door thickness18 mm—
HardwareDTC soft-close hinges and runnersBlum or Hettich on request
Top surfaceQuartz, sintered stone, solid surface or graniteSupplied with or without top
Edge bandingPVC, 1-2 mm, colour-matched—
PackingFlat-pack or assembledFOB / CIF / DDP

What drives the price

There is no per-unit list price for a custom vanity. The quote is built bottom-up from five blocks, and the same 900 mm unit can sit at very different numbers depending on how each block is specified.

  • Carcass board. E0 plywood costs more than E1, and both cost more than melamine-faced particleboard. In a wet area this is the block you should not cut — moisture performance is decided here, not by the door.
  • Door finish. Lacquer, PET, acrylic, veneer and PVC membrane sit at different price levels, and within lacquer the number of coats and the matte or gloss level change the cost. Veneer adds grain-matching work.
  • Hardware brand. DTC, Blum and Hettich are three different prices for the same hinge count. Specify the brand before the quote, or the quote will assume one.
  • Top surface. Quartz, sintered stone, solid surface and granite are separate cost blocks. A vanity quoted without a top is not comparable to one quoted with it.
  • Freight and terms. Flat-pack ships more units per container than assembled. FOB, CIF and DDP place different costs on different sides of the invoice.

Two quotes only compare if all five blocks match. Ask for the specification sheet behind each number.

Lead time and MOQ

Production is 25-35 days after drawing approval and deposit. The clock starts when the drawings are approved, not when you enquire — so drawing turnaround is the part of the schedule you control.

Door-to-door is usually 5-8 weeks once production, booking, sailing, clearance and haulage are added. Shop drawings are issued free after deposit.

MOQ starts at 1 set for sampling, and project pricing applies from 20 sets upward. For a developer that sequence is useful: build one show-flat vanity at sample MOQ to approve the finish and the basin position, then release the project order once the unit is signed off. On-site installation supervision is available for large projects.

Request a quote

Send your vanity drawings, the width and depth per unit, the carcass board grade, the door finish and the hardware brand you want, plus the quantity and destination port. We return a specification sheet and a quote built from those blocks — no per-unit price is published because none of it is standard until you specify it. Message us on WhatsApp with your drawing set to start.

ENQUIRY

Start with
a brief.

Send the drawings and the room list. We will come back with a scope, a finish schedule and a price range.

Your details stay with our project team. No mailing lists.

Buyer questions

What makes a vanity last in a wet room?

The substrate and the sealing matter more than the finish. We build the carcass in a moisture-tolerant board, seal cut edges, and set the unit on legs or a plinth so water never sits under it.

Are mirror cabinets supplied with lighting?

Lighting and sockets can be integrated, but the electrical detail has to come from the project's electrician. We build to that drawing rather than guessing the circuit.

Can the vanity be sized to a stone top?

Yes. The carcass is drawn to the stone template and the top is cut to the unit, not the other way round. Confirm the stone thickness before the carcass is released.