
Integrated Hardware
Hinges, runners and lift systems specified by function and load, not by price band.
Integrated hardware is the hinge, runner and lift-system package fitted to custom cabinetry at the factory, so doors and drawers arrive matched to their carcass. It suits developers, contractors and joinery buyers ordering kitchens or whole-house millwork who need hardware named in writing rather than left to the installer.
Specifications
Hardware is specified by function and load, not by price band. The table below shows what is fixed at order stage and what is decided at drawing review. Where a value depends on the unit, it is set on the approved shop drawing — not on this page.
| Item | What is specified | Decided at |
|---|---|---|
| Hinges | Brand and function by door type and door weight; Blum, Hettich or DTC can be named | Drawing review |
| Runners / drawer systems | Runner type by drawer width, load and opening style (standard, soft-close, push-to-open) | Drawing review |
| Lift systems | Flap and lift mechanism by door width and height, for wall and tall units | Drawing review |
| Handles | Profile, bar or integrated (handleless) — matched to door finish and edge detail | Finish selection |
| Carcass board | E0/E1 plywood, particleboard with melamine, or solid wood | Quotation |
| Door finish | Lacquer (matte/gloss), PET, acrylic, veneer, PVC membrane | Quotation |
| Lead time | Confirmed after drawing review | Drawing approval |
Two points are worth insisting on. First, ask for the hardware brand and model line to appear as a written line in the quote — a named brand is a line you can read and compare, an unbranded one is not. Second, ask which hinge and runner is used on the heaviest door and the widest drawer in the package, because that is where a cheap substitution shows up first.
What drives the price
Hardware is one of five cost blocks in a cabinetry quote, alongside carcass board, door finish, countertop and freight/duty/installation. Within the hardware block, four things move the number:
- Brand tier. A named European brand and a domestic brand are different lines in the quote, and the gap is per unit, so it multiplies across every door and drawer.
- Function, not quantity. Soft-close, push-to-open and lift mechanisms cost more than a standard hinge or runner. A handleless design removes handle cost but adds machining and mechanism cost.
- Door and drawer size. Wider and heavier fronts need a higher-rated hinge or runner. Oversizing a front to save on unit count usually costs more in hardware.
- Unit count. Hardware is priced per piece, so the count follows the drawing: every door, every drawer, every flap.
Because hardware is priced per piece, the cheapest way to control it is to control the drawing — fewer, better-proportioned fronts rather than many small ones.
Lead time and MOQ
Lead time is confirmed after drawing review, not at enquiry. The clock starts at approved drawings and deposit, and production runs 25–35 days from that point. Door-to-door delivery to most export markets lands in the region of 9–14 weeks once ocean freight and clearance are added.
MOQ starts at 1 set for sampling, with project pricing from 20 sets upward. A single-container order books and sails faster than a multi-container phased shipment, because the first container is not waiting on the second. Flat-pack loads more cabinetry per container and is the usual choice for export; assembled shipping is a separate decision with its own cost.
Free shop drawings are issued after deposit. Hardware decided in writing at that stage — brand, function, and the rating on the heaviest front — is what keeps the production window from slipping.
Next step
Send your dimensioned drawings or a measured sketch with wall lengths, ceiling height and the door and drawer layout, and tell us which hardware brand you want named. We will confirm the hardware schedule and the lead time against your drawing. Message us on WhatsApp with your drawing set to start the enquiry.
Start with
a brief.
Send the drawings and the room list. We will come back with a scope, a finish schedule and a price range.
Buyer questions
Who specifies the hardware?
Either the client's specification or ours, but it is fixed before cutting because hinge and runner choice changes the drilling pattern.
Can we use a brand we already standardise on?
Yes, provided the model is available in the market and the fixings match the panel thickness. We confirm before production rather than substituting on the line.
What about warranty on hardware?
Hardware carries the manufacturer's warranty, and we pass through the model numbers so the client can claim locally instead of shipping parts back.










