
Veneer & Stone
Veneer matching, sintered stone and edge detail — sampled as physical panels, not renders.
This product line covers cabinetry where the visible surface is real wood veneer or sintered stone: kitchen runs, TV walls, vanities and feature panels. It suits developers, contractors and interior studios who need grain-matched veneer and stone tops from one factory rather than two suppliers. Every surface is sampled as a physical panel before production.
Specifications
We publish material categories and the decisions behind them, not fixed numbers, because each project is drawn to the room. The table below shows what is specified, the options we quote, and what the choice decides. Anything not confirmed in writing on your approved drawing is not part of the order.
| Element | Options we quote | What it decides |
|---|---|---|
| Carcass / board | E0 or E1 plywood; melamine-faced particleboard; solid wood | Moisture tolerance, screw-holding, unit weight |
| Door / front finish | Veneer, lacquer (matte or gloss), PET, acrylic, PVC membrane | Most of the visible cost and most of the visible risk |
| Veneer detail | Grain direction, book-matching, edge banding, joint position | Whether panels read as one continuous surface |
| Stone surface | Sintered stone, quartz, solid surface, granite | Heat behaviour, repairability, slab volume in the container |
| Hardware | Blum, Hettich or DTC; soft-close or not; lift-up and pull-out systems | Daily feel, spare-part sourcing, unit price |
| Dimensions | Set per approved shop drawing, in millimetres | Fit on site; nothing is cut before drawing approval |
| Packing | Flat-pack or assembled | Sets per container, site labour, freight cost |
Ask for four things in writing before you compare quotes: the carcass board grade, the veneer matching rule, the stone type and edge profile, and the hardware brand and model. A quote missing any of these is not comparable with one that has them.
What drives the price
There is no headline rate per square metre, because the same footprint can be built three legitimate ways. In our quoting experience the three biggest swings are the door finish, the countertop and the hardware brand, in that order. Carcass board matters, but the carcass is a large share of the volume and a smaller share of the cost.
- Door and front finish. Veneer adds grain matching and edge work; lacquer adds curing and handling steps; PET and PVC membrane sit at the lower end.
- Stone. Sintered stone and quartz slabs ship in A-frame crates and consume container volume fast. A stone top on every unit cuts the set count per container.
- Hardware. Blum and Hettich cost more than DTC; lift-up systems and corner carousels add per-unit cost.
- Packing method. Flat-pack loads more cabinetry per container; assembled carcasses take full volume plus pallet height.
- Freight and duty. FOB, CIF or DDP changes who carries the risk, not the factory price.
Lead time and MOQ
MOQ starts at 1 set for sampling, and project pricing applies from 20 sets upward. A show-flat or showroom unit at sample MOQ is a legitimate first order. Lead time is confirmed after drawing review, not before: the production clock starts on drawing approval and deposit, and every revision cycle you add comes off the schedule.
Shop drawings are issued free after deposit. Finish and hardware should be settled in writing before the project order, not during it. For a single-container order, flat-pack is usually the right call unless your site has no assembly labour at all. On a one-set trial, ocean freight and destination charges typically exceed the value of the cabinets, so budget the logistics before the product.
Talk to us about your veneer and stone scope
Send your drawings, a room schedule or even a rough sketch with dimensions, and tell us the destination market and whether you want flat-pack or assembled. We will come back with a specification sheet, a loading plan and a quote. For the fastest answer, message us on WhatsApp at +86 139 2542 8897 with your project type and scope in brief.
Start with
a brief.
Send the drawings and the room list. We will come back with a scope, a finish schedule and a price range.







